<legend id="flf16"><track id="flf16"></track></legend>

    <acronym id="flf16"><var id="flf16"></var></acronym>

          <blockquote id="flf16"><i id="flf16"></i></blockquote>
          <em id="flf16"></em><acronym id="flf16"><nav id="flf16"><option id="flf16"></option></nav></acronym>
          <li id="flf16"><th id="flf16"><em id="flf16"></em></th></li>
        1. <blockquote id="flf16"></blockquote>
          亚洲精品香蕉婷婷在线观看,桃色综合网,国产精品免费久久久久影院小说,2018亚洲天堂,中文天堂在线www,xxxx.中出日韩,中文字幕 制服 亚洲 另类,久久久综综合色一本伊人
          歡迎您瀏覽濟南巨野河福華建材廠,主營:濟南膩子粉,濟南石膏粉,濟南抹面砂漿等建筑裝飾材料,大量批發,歡迎咨詢。

          專注綠色建筑裝飾材料

          經營管理理念:讓客戶用的放心!

          24小時服務熱線:

          13864111871

          當前位置: 首頁 - 新聞動態 > 行業資訊
          行業資訊
          聯系我們

          濟南福華建材廠

          聯系人:吳老師 

          電話: 

          手機:13864111871
                    0531-81901300
          地址:山東省濟南市高新開發區巨野河辦事處山圈村西


          分析抹灰砂漿的3大錯誤認知

          來源:http://m.360orange.cn 日期:2022-09-14 發布人:

          凡涂抹在建筑物或建筑構件表面的砂漿,統稱為抹面砂漿。根據抹面砂漿功能的不同,可將抹面砂漿分為普通抹面砂漿、裝飾砂漿和具有某些特殊功能的抹面砂漿。下面來分析下濟南抹灰砂漿的3大錯誤認知。
          Mortar applied on the surface of buildings or building components is collectively referred to as plastering mortar. According to the different functions of plastering mortar, plastering mortar can be divided into ordinary plastering mortar, decorative mortar and plastering mortar with some special functions. Here are three major misconceptions of Jinan plastering mortar.
          誤區一:抹灰砂漿的強度越大越好預
          Myth 1: The greater the strength of plastering mortar, the better
          拌抹灰砂漿的強度等級從M5~M20不等,常用的強度等級是M5和M10。
          The strength grade of plastering mortar varies from M5 to M20, and the commonly used strength grades are M5 and M10.
          對于抹灰砂漿來說,不同的基材要求的砂漿強度等級也不盡相同,這與基材和砂漿層的彈性模量差有關,彈性模量相差越大,出現空鼓開裂的風險就越大。標號越大,意味著水泥用量越大,也就意味著水泥水化時砂漿的收縮率就越大。
          For plastering mortar, different base materials require different mortar strength grades, which is related to the difference between the elastic modulus of the base material and the mortar layer. The greater the difference between the elastic modulus, the greater the risk of hollowing and cracking. The larger the grade is, the greater the amount of cement is, which means the greater the shrinkage of mortar when the cement is hydrated.
          收縮率相差越大,砂漿與基材產生的應力越大,造成砂漿開裂的風險越大。抹灰砂漿作用主要是保護基層和找平,因此抹灰強度只需要達到標號要求就可以,強度過高意義不大,反而增加無謂的成本。
          The greater the difference in shrinkage, the greater the stress generated by mortar and base material, and the greater the risk of mortar cracking. The function of plastering mortar is mainly to protect the base course and level, so the plastering strength only needs to meet the requirements of the mark. It is not significant to have too high strength, but it increases the unnecessary cost.
          誤區二:抹灰砂漿的保水性越高越好
          Mistake 2: The higher the water retention of plastering mortar, the better
          控制抹灰砂漿的保水率主要作用是保證砂漿在凝結硬化前,砂漿中的水不被基層吸收,不因失水過快而導致砂漿中的水泥沒有水分水化,從而降低砂漿本身強度和砂漿與基層的粘結強度。
          The main function of controlling the water retention rate of the plastering mortar is to ensure that the water in the mortar will not be absorbed by the base course before the mortar is set and hardened, and that the cement in the mortar will not be hydrated due to rapid water loss, thus reducing the strength of the mortar itself and the bonding strength between the mortar and the base course.
          水泥理論上完全水化所需水分是水泥質量的26%,所以,只要抹灰砂漿的保水性能保證砂漿可操作性和砂漿中水泥水化所需水分即可。
          In theory, the water required for complete hydration of cement is 26% of the cement quality. Therefore, as long as the water retention performance of plastering mortar ensures the operability of mortar and the water required for cement hydration in mortar.
          如果抹灰砂漿保水性太好,那么砂漿中實際所保留的水分就多,砂漿真實水灰比就大,砂漿的實際強度就低,與塊材粘結強度也相應低。
          If the water retention property of plastering mortar is too good, there will be more water actually retained in the mortar, the true water cement ratio of the mortar will be large, the actual strength of the mortar will be low, and the bonding strength with the block will be correspondingly low.
          但如此也會影響水泥漿與基層的粘結,并將延長砂漿的凝結時間,產生表干內濕的“結皮”現象,從而影響抹灰速度,并增加施工難度。
          However, this will also affect the bonding between the cement paste and the base course, and will extend the setting time of the mortar, resulting in a "skinning" phenomenon of dry surface and wet inside, which will affect the plastering speed and increase the construction difficulty.
          濟南抹灰砂漿
          誤區三:抹灰砂漿的用水量越少越好
          Mistake 3: The less water is used for plastering mortar, the better
          抹灰砂漿需水量的因素很多,主要是取決于原材料,包括膠凝材料和細骨料,其中骨料的用量大,因此其材質的優劣能影響砂漿的需水量。
          There are many factors affecting the water demand of plastering mortar, mainly depending on raw materials, including cementitious materials and fine aggregate, in which the amount of aggregate is large, so the quality of its material can affect the water demand of mortar.
          對于河砂來說,干混砂漿需水量的合理范圍一般在13~16%(這里需水量指水與干料的比),而機制砂砂漿需水量的合理范圍一般在13~15%,超過大需水量時砂漿的保水率會降低,容重增大,施工性會變得不好,強度降低,因此減少砂漿的需水量是需的,砂漿廠可以通過加入有減水作用的外加劑來進行調節。
          For river sand, the reasonable range of water demand for dry mixed mortar is generally 13~16% (water demand here refers to the ratio of water to dry material), while the reasonable range of water demand for machine-made sand mortar is generally 13~15%. When the water demand exceeds a large amount, the water retention rate of mortar will decrease, the unit weight will increase, the constructability will become poor, and the strength will decrease. Therefore, it is necessary to reduce the water demand for mortar, The mortar plant can be adjusted by adding additives with water reducing effect.
          然而,當需水量小于特定的范圍時,砂漿的施工性能同樣會變差,主要表現在漿體飽滿程度不夠,砂漿不好收面,對于機制砂來說可能造成砂漿發粘,影響施工性。對于具有減水作用的砂漿外加劑,當其減水效率超過一定限度時,砂漿流動性也會隨之增加,可能會造成砂漿上墻后出現流掛現象。
          However, when the water demand is less than a specific range, the construction performance of mortar will also become worse, which is mainly reflected in the insufficient fullness of the mortar and poor finishing of the mortar, which may cause the mortar to become sticky for the machine-made sand and affect the workability. For mortar admixtures with water reducing effect, when its water reducing efficiency exceeds a certain limit, the fluidity of mortar will also increase, which may cause sagging phenomenon after the mortar is mounted on the wall.
          干混抹灰砂漿的需水量根據材料不同,其合理范圍也不盡相同,需水量太多或太少都會不利于達到砂漿的佳狀態,因此,需要掌握好砂漿需水量的合理范圍。
          The reasonable range of water demand for dry mixed plastering mortar varies according to different materials. Too much or too little water demand will not be conducive to achieving the good state of mortar. Therefore, it is necessary to master the reasonable range of water demand for mortar.
          要注意,各層抹灰面的作用和要求不同,每層所選用的砂漿也不一樣。同時,基底材料的特性和工程部位不同,對砂漿技術性能要求不同,這也是選擇砂漿種類的主要依據。更多關于改材料的問題或者需求都可以來我們網站http://m.360orange.cn咨詢了解。
          It should be noted that the function and requirements of each layer of plastering surface are different, and the mortar selected for each layer is also different. At the same time, the characteristics of base materials and project parts are different, and the requirements for mortar technical performance are different, which is also the main basis for selecting mortar types. More questions or needs about changing materials can come to our website http://m.360orange.cn Ask about it.

          ??? 主站蜘蛛池模板: 国产日韩欧美精品区性色| 日韩区中文字幕在线观看| 亚洲精品无码成人| 久久久2019精品| 成人3D动漫一区二区三区| 国产3P成人在线视频| 免费人成视频在线观看视频| 亚洲精品无码成人A片九色播放| 亚洲高潮喷水无码AV电影| 久久婷婷五月综合色欧美| 777米奇色8888狠狠俺去啦| 中文字幕乱码在线播放| 色一情一乱一伦麻豆| 亚洲国产精品高清久久久| 婷婷五月天影院| 国产成人一区二区三区在线 | 狠狠综合久久综合| 亚洲日韩爆乳中文字幕欧美| 色欲AV无码一区二区人妻| 久久久久亚洲精品影视| 亚洲AⅤ色无码乱码精品| 在线a人片免费观看| 91精品久久久久久久免费看| 中文字幕在线一区乱码| 亚洲天堂视频在线免费观看| 激情综合五月| 九九热最新视频免费看| 日韩视频第一页| 日本午夜视频| 十八禁午夜福利免费网站| 久久久久久久久久8888| 特殊重囗味sm在线观看无码| 国产无遮挡无码视频免费软件 | 久久99精品久久久久婷婷暖| 亚洲第一综合天堂另类专| 好吊av| 国产午夜精品美女裸身视频69| 青娱乐av| 大陆精大陆国产国语精品| 在线天堂中文新版www| 丰满尤物白嫩啪啪少妇|